Report a cyberincident

Received a strange email? Is your computer displaying strange things without you clicking on anything? Has your password been changed without you doing it? Report a cyber incident by clicking the link below.

eduroam for Android

The following settings are for mobile devices running the Android operating system (version 2 and later). This configuration only needs to be done once - your settings will be saved and you will just need to connect to the eduroam access point in the future.

Due to the many different versions and user interfaces of Android, the following are the general settings for eduroam and may not be specific to your device.

Step 1: From your applications menu, choose Settings.

Step 2: Select Wireless and Networks.

Step 3: Select Wi-Fi Settings.

Step 4: Ensure that Wi-Fi is enabled. Under Wi-Fi Networks will be a list of wireless networks that are available to connect to.

Step 5: Select the network eduroam - a pop up window will appear asking for information.

Step 6: Enter the following:

EAP method: Select PEAP

Phase-2 authentication: Select MSCHAPV2

CA certificate: leave blank

User certificate: leave blank

Please note: some devices will not allow the 'connect' button to be active unless the setting 'CA certificate' is set to 'Do not validate'.

Identity: Enter your SCU Computer Login* username

IMPORTANT: Your username must be in the following format:

Note this is different to wireless@SCU, as your username MUST be followed by

Anonymous Identity: leave blank

Password: Enter your SCU Computer Login* password

Step 7: Press Connect.

Congratulations! You are now connected to eduroam(Note the wireless icon that will appear when you are connected to wireless).

If you have any trouble connecting (eg. *If you do not know your SCU Computer Login details) please visit the Frequently Asked Questions.

Have more questions? Submit a request
Was this article helpful?
0 out of 0 found this helpful