The following settings are for mobile devices running the Android operating system (version 2 and later). This configuration only needs to be done once - your settings will be saved and you will just need to connect to the eduroam access point in the future.
Due to the many different versions and user interfaces of Android, the following are the general settings for eduroam and may not be specific to your device.
Step 1: From your applications menu, choose Settings.
Step 2: Select Wireless and Networks.
Step 3: Select Wi-Fi Settings.
Step 4: Ensure that Wi-Fi is enabled. Under Wi-Fi Networks will be a list of wireless networks that are available to connect to.
Step 5: Select the network eduroam - a pop up window will appear asking for information.
Step 6: Enter the following:
EAP method: Select PEAP
Phase-2 authentication: Select MSCHAPV2
CA certificate: leave blank
User certificate: leave blank
Please note: some devices will not allow the 'connect' button to be active unless the setting 'CA certificate' is set to 'Do not validate'.
Identity: Enter your SCU Computer Login* username
IMPORTANT: Your username must be in the following format:
Note this is different to wireless@SCU, as your username MUST be followed by @scu.edu.au
Anonymous Identity: leave blank
Password: Enter your SCU Computer Login* password
Step 7: Press Connect.
Congratulations! You are now connected to eduroam. (Note the wireless icon that will appear when you are connected to wireless).
If you have any trouble connecting (eg. *If you do not know your SCU Computer Login details) please visit the Frequently Asked Questions.