Report a cyberincident

Received a strange email? Is your computer displaying strange things without you clicking on anything? Has your password been changed without you doing it? Report a cyber incident by clicking the link below.

wireless@SCU for Android

The following settings are for mobile devices running the Android operating system (version 2 and later). This configuration only needs to be done once - your settings will be saved and you will just need to connect to the wireless@SCU access point in the future.

Due to the many different versions and user interfaces of Android, the following are the general settings for wireless@SCU and may not be specific to your device.

Step 1: From your Settings menu, select Connections

Step 2: Select Wi-Fi Settings.

Step 3: Ensure that Wi-Fi is enabled. Under Wi-Fi Networks will be a list of wireless networks that are available to connect to.

Step 4: Select the network wireless@SCU - a pop up window will appear asking for information.

Step 5: Enter the following:

EAP method: Select PEAP

Phase-2 authentication: Select MSCHAPV2

CA certificate: leave blank

User certificate: leave blank

Please note: some devices will not allow the 'connect' button to be active unless the setting 'CA certificate' is set to 'Do not validate'.

Identity: Enter your SCU short username

Anonymous Identity: leave blank

Password: Enter your SCU Computer Login* password

Step 6: Press Connect.

Congratulations! You are now connected to wireless@SCU(Note the wireless icon that will appear when you are connected to wireless)

If you have any trouble connecting (eg. *If you do not know your SCU Computer Login details) please visit the wireless@SCU Frequently Asked Questions.

Have more questions? Submit a request
Was this article helpful?
1 out of 1 found this helpful